Earthworks DK7
Earthworks DK7 Earthworks DK7

Earthworks DK7 Drum Kit System

$2,999.00

Smart design. Sonic brilliance. Built tough.

 

The Earthworks DK7 Drum FullKit System gives you everything you need to mic a three-tom drum kit. You get four DM20 mics, complete with RimMounts and windscreens, for close-miking toms and snare, plus two SR25 cardioids for overheads, and one specially engineered SR20LS (low sensitivity) mic for bass drum. The mics are housed in a roadworthy, high-impact case that stores each microphone with the mic mounts attached to save you setup and teardown time.

Description

Seven Alone. One Together.

 

On their own, each microphone in the Earthworks DK7 kit is best in its class. When combined, they capture the full complexity of your drumkit.

 

 

 

Your Drums. Your Sound.

 

The DK7 makes whatever drum kit you’re miking sound like just that―you. A crystal clear translation of your sound.

 

 

 

Lightning Fast

 

Nothing compares to the lightning speed of the DM20. Every detail, every nuance, and every texture remains flawlessly intact.

 

 

 

Bring It All Together

 

A perfect sonic image of your whole kit from above. A matched pair of Earthworks SR25s bring transparency, clarity, and attack to your drum sound.

 

Punch Through the Mix

 

With handling capabilities of 150dB SPL, and a cardioid condenser capsule that captures the full spectrum of sound all the way down to 20Hz, the Earthworks SR20LS captures every detail you’re after.

 

Isolation Like Never Before

 

Massive rear rejection and a polar pattern that’s consistent across the entire frequency range means any off-axis leakage is virtually nonexistent.

Specifications

  DM20
Frequency Response 20Hz – 20kHz
Polar Pattern Cardioid
Sensitivity 8mV/Pa (-42dBV/Pa)
Power Requirements 24-48V Phantom, 10mA
Max Acoustic Input 150dB SPL
Signal-to-Noise Ratio 74dB A-weighted
Output XLR (pin 2+)
Output Impedance 200Ω balanced (between pins 2 & 3)
Min Output Load 1000Ω between pins 2 & 3
Noise 20dB SPL equivalent (A weighted)
Dimensions (L x D) 282mm x 22mm (11.12 x .860 inches)
Gooseneck Length 121mm (4.75 inches)
Weight .55 lb. (.25kg)
SR25
Frequency Response 20Hz – 25kHz
Polar Pattern Cardioid
Sensitivity 10mV/Pa (-40dBV/Pa)
Power Requirements 24-48V Phantom, 10mA
Max Acoustic Input 145dB SPL
Output XLR (pin 2+)
Output Impedance 65Ω balanced (between pins 2 & 3)
Min Output Load 600Ω between pins 2 & 3
Noise 20dB SPL equivalent (A weighted)
Dimensions (L x D) 165mm x 22mm (6.5 x .860 inches)
Weight .35 lb. (160g)
SR20LS
Frequency Response 20Hz – 20kHz
Polar Pattern Cardioid
Sensitivity 3mV/Pa (-50dBV/Pa)
Power Requirements 24-48V Phantom, 10mA
Max Acoustic Input 150dB SPL
Signal-to-Noise Ratio 74dB A-weighted
Output XLR (pin 2+)
Output Impedance 200Ω balanced (between pins 2 & 3)
Min Output Load 1000Ω between pins 2 & 3
Noise 20dB SPL equivalent (A weighted)
Dimensions (L x D) 192mm x 22mm (7.57 x .860 inches)
Weight .36 lb. (164g)